$1,265.00 – $1,845.00
Please ensure all exhaust system options have been selected to your preference – See ‘Options for exhaust’ below for more information
Beaudesert Exhaust’s full twin 2 3/4″ into 3 1/2″ mandrel bent exhaust system to suit the Toyota LandCruiser 200 Series with DPF.
Rugged is our standard system which is made out of 441 grade stainless steel tube and is then painted in a heat proof paint.
Read more about 441 grade stainless steel and its benefits on our FAQ page.
Ultimate is our premium system which is made out of 304 grade stainless steel tube that we polish in-house.
Creative Conversions chassis extensions available
Other extensions are available but please enquire before purchase.
This exhaust starts after the Diesel particulate filter (DPF) to comply with ADR laws.
A Diesel Particulate Filter (DPF) reduces the emissions from diesel fuelled vehicles. The filter traps diesel soot and once it is full it must be cleaned. This occurs through a process called “regeneration”, where the diesel particles are burnt off at high temperatures.
The DPF is not the only restriction in your exhaust. The factory pipe size and muffler both contribute to some loss in power and torque. On the factory exhaust system the airflow is restricted by the chambered internals of the muffler, as well the reduced size tube on each end. For vehicles fitted with a DPF our exhaust kits come standard with a small resonator this gives your vehicle the best airflow.
We have found through research and development that a 2 ¾” into 3 1/2” exhaust system performs better than any other size for this vehicle. Not only have we completed real world testing, we also receive significant amounts of customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle. Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle.
Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:
Options for exhaust
The no muffler pipe is a replacement pipe that bolts in place of the muffler or resonator to gain maximum note.
The no rear muffler pipe is a replacement pipe that bolts in place of the rear muffler to gain maximum note.
If you wish to have both muffler section and no muffler pipe, select the muffler or resonator above and click here to add the no muffler pipe to your cart.
If you wish to have both rear muffler section and no rear muffler pipe, select the rear muffler above and click here to add the no muffler pipe to your cart.
You can also change the look of your exhaust with our tailpipe options: (standard tailpipe included)
Please note: Our team will endeavour to dispatch your order as quickly as possible, however, some options when selected may require a longer fabrication time.
Please note: during our transition process from aluminised steel to 441 grade stainless steel, some components may have a mild steel bracket for a limited time. These components are 441 grade tube and still have 304 grade stainless steel plates with stainless welding wire and will not make the exhaust any weaker. We are confident that this will not cause any issues and this is backed up with our 6 year warranty.
Would you like your system fitted by one of our experts?
Our workshop is located at 158 Enterprise Dr, Beaudesert QLD 4285.
Approximate fitting time is 2 Hrs
Fitting cost for this system is $250*
Fitting will be charged on the day of your appointment.
Select fitting option at checkout and one of our staff members will be in contact with you to confirm availability.
*Please be aware additional charges may apply on the day of fitment if standard system needs modifications. Ensure all your aftermarket modifications (located on the checkout page) are listed correctly to try and avoid unexpected charges.