NISSAN TITAN 2016-2019 A61 5.0L V8 Turbo Diesel Exhaust With DPF

Beaudesert Exhaust’s 4″ into twin 3 1/2″ mandrel bent exhaust system to suit the Nissan Titan with DPF.

Rugged

Rugged is our standard system which is made out of 441 grade stainless steel tube.

Read more about 441 grade stainless steel and its benefits on our FAQ page. 

Ultimate
Ultimate is our premium system which is made out of 304 grade stainless steel tube that we polish in-house.

This exhaust starts after the Diesel particulate filter (DPF) to comply with ADR laws.

A Diesel Particulate Filter (DPF) reduces the emissions from diesel fuelled vehicles. The filter traps diesel soot and once it is full it must be cleaned. This occurs through a process called “regeneration”, where the diesel particles are burnt off at high temperatures.

The DPF is not the only restriction in your exhaust. The factory pipe size and muffler both contribute to some loss in power and torque. On the factory exhaust system the airflow is restricted by the chambered internals of the muffler, as well the reduced size tube on each end. For vehicles fitted with a DPF our exhaust kits come standard with a small resonator this gives your vehicle the best airflow.

Not only have we completed real world testing, we also receive customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle. Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle.

Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:

• Exhaust starts after Diesel Particulate Filter to comply with ADR laws
• No muffler is supplied in this system as the DPF acts as a muffler and quietens the exhaust down
• 3 bolt 10mm 304 grade stainless steel flange plates
• 5″ 304 polished stainless steel exhaust tips on 441 stainless steel
• Reinforced brackets with supports – 5mm 304 grade stainless steel flat bar
• Full replacement block rubber set up
• Systems are available in 441 grade stainless steel or 304 grade polished stainless steel.
• Zinc plated locking nuts and bolts
• Fitting Kit and easy to follow instructions
• Boxed and bubble wrapped for freight
• Freighted Australia wide with insurance in a prompt time frame

Please note: Our team will endeavour to dispatch your order as quickly as possible, however, some options when selected may require a longer fabrication time.

Would you like your system fitted?

Our experts over at Innovative Motorworks are the best to assist with all fitting needs. They are located at 6/14 Hopper Avenue, Ormeau, QLD, 4208.

Fitment for this system requires 3 hours.

Fitting cost will be charged on the day of your appointment.

Select fitting option at checkout and one of our staff members will be in contact with you to confirm availability.

*Please be aware additional charges may apply on the day of fitment if standard system needs modifications. Ensure all your aftermarket modifications (located on the checkout page) are listed correctly to try and avoid unexpected charges.