Ram DT 1500 2019-Current 5.7L V8 Petrol Exhaust


Please ensure all exhaust system options have been selected to your preference


Beaudesert Exhaust’s Twin 3″ mandrel bent exhaust system with high flow extractors to suit the Hemi Ram DT 1500.



Built for power and comfort, Beaudesert Exhaust’s Ram DT sports exhaust really has Performance With Bite! Our complete mandrel bent stainless steel systems will be sure to last with your car, whatever you throw at it. Designed, bent and fabricated in South East Queensland, with focus on performance and flow with no drone.


Our Rugged range is produced with 441 grade Stainless Steel tube and 304 grade Stainless Steel hangers and supports, mufflers and flex joints. Supplied in a RAW finish.
Read more about 441 grade stainless steel and its benefits on our FAQ page.


Ultimate systems are complete High Polished 304 grade Stainless Steel tube. Polished to a high luster these are the best systems available on the market.


The Beaudesert Exhaust system is a true twin 3” design which removes the flattened section under the gearbox allowing for less heat and easier gearbox servicing. The system routes behind the gearbox cross member, eliminating excess heat on and around the gearbox, and lowering gearbox temperature during use. This exhaust has been designed with a focus on high flow, low restriction for maximum performance.


Included in this kit is Beaudesert Exhaust’s 2mm wall thickness Stainless Steel, 3″ 4 into 1 extractors with internal merge spike.  These feature self-locating V-band clamps between the extractors and engine pipes for longevity which removes the need for a gasket at this high temperature area. Supplied coated in Cerakote Ceramic Coatings and will perform at temperatures up to 980°C, they set the industry standard in high temperature coatings. Cerakote is the world’s leading manufacturer of thin-film ceramic coatings and technology.


Complete with replacement high flow Catalytic Converters and rear 02 sensor extensions that have been specially designed ensuring no engine management issues and no tuning is required. 


Exhaust tone has been tuned to provide an mildly aggressive tone that isn’t over the top, with no drone during regular driving or towing.


Finished with 5″ 316 Stainless Steel double wall exhaust tips fit the rear bar cutouts perfectly.



  • Fits ASV and SCD converted vehicles
  • 1 ¾” 4 into 1 header made from Stainless Steel 2mm thick, utilizing the factory multi-layer steel gaskets and V-band clamp connection to engine pipes. Coated in Cerakote ceramic coating as standard
  • 3″ Twin exhaust
  • High flow catalytic converters
  • Double braided Stainless Steel flex joints standard on all systems
  • Crossover Intermediate
  • Drone free tuning resonators
  • Two perforated straight through centre mufflers
  • 5″ 316 Stainless steel dual wall angle cut exhaust tips
  • 2 bolt 10mm 304 grade stainless steel flange plates
  • Reinforced 12mm 304 grade Stainless Steel knob bar brackets with supports
  • Systems are available in either 441 grade Stainless Steel or 304 grade polished Stainless Steel
  • Fitting Kit and easy to follow instructions
  • Boxed and bubble wrapped for freight
  • Freighted Australia wide with insurance in a prompt time frame


Would you like your system fitted?

Our experts over at Innovative Motorworks are the best to assist with all fitting needs. They are located at 6/14 Hopper Avenue, Ormeau, QLD, 4208.

Fitment for this system requires all day.

Fitting will be charged on the day of your appointment.


Select fitting option at checkout and one of our staff members will be in contact with you to confirm booking.

*Please be aware additional charges may apply on the day of fitment if standard system needs modifications. Ensure all your aftermarket modifications (located on the checkout page) are listed correctly to try and avoid unexpected charges.

You may also like…