fbpx

NISSAN PATROL 1997-2016 GU 4.8L Petrol Exhaust

$2,589

Please ensure all exhaust system options have been selected to your preference – See ‘Options for exhaust’ below for more information

Replacement Cylinder Head Stud Kit * 

Would you like a replacement stud kit for the head? Most studs will come out when removing old manifold

Two or Four Sensors * 

Does your vehicle have 2 or 4 sensors in the exhaust?
Late models have four sensors and require right angle adapters for the bottom two sensors.

Beaudesert Exhaust’s full 2 1/2″ mandrel bent exhaust system to suit the Nissan Patrol GU 4.8L

 

Rugged
Rugged is our standard stainless steel system which is left as a raw finish.

 

Let your Naturally Aspirated car breathe! The factory manifold restricts the performance of your car. Once you change to extractors off the side of the head, you will gain up to 10% improved performance just by letting the gasses flow out of the motor *. This allows the motor to work easier and you will see an improvement in performance and fuel economy.

 

We make our own extractors. We mandrel bend and manufacture our extractors using 2mm wall thickness tube. This reduces the likelihood of cracking and any other weaknesses in the pipe work. Unlike other suppliers who use pressed merge collectors we have found laser cut merge collectors to give the best strength and flow possible.

 

We have found through research and development that a 2 1/2” exhaust system performs better than any other size for this vehicle. Not only have we completed real world testing, we also receive significant amounts of customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle. Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle.

Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:

  • Beaudesert Exhaust’s own Extractors – 2mm wall thickness, laser cut merge collectors
  • Ceramic coating of extractors is standard
  • Replacement stud kit for the cylinder head for naturally aspirated extractor systems is available. Studs may become stretched over time or may break and for this reason we do advise to replace
  • Euro 3 Standard 200 cell hi-flow Catalytic Converter – meets all emissions standards without restricting gas flow
  • Double braided stainless steel flex joint standard on all systems – inner and outer braid makes the flex joint stronger
  • Perforated straight through muffler as standard
  • 2 bolt 10mm 304 grade stainless steel flange plates
  • Reinforced brackets with supports – 12mm 304 grade stainless steel rod with knobs ensures the hangers don’t fall out of rubbers and 5mm 304 grade stainless steel flat bar for quality and strength
  • Systems are available in Rugged Range.
  • Zinc plated locking nuts and bolts
  • Fitting Kit and easy to follow instructions
  • Boxed and bubble wrapped for freight
  • Freighted Australia wide with insurance in a prompt time frame

Would you like your system fitted?

Our experts over at Innovative Motorworks are the best to assist with all fitting needs. They are located at 6/14 Hopper Avenue, Ormeau, QLD, 4208.

Fitment for this system requires 5 hours.

Fitting cost will be charged on the day of your appointment.

 

Select fitting option at checkout and one of our staff members will be in contact with you to confirm availability.

*Please be aware additional charges may apply on the day of fitment if standard system needs modifications. Ensure all your aftermarket modifications (located on the checkout page) are listed correctly to try and avoid unexpected charges.

Extra charges may apply for broken studs (replacement stud kit and labour to fit)

You may also like…