Suitable for TOYOTA HILUX 1997-2005 2.7L EFI Petrol Exhaust

This exhaust suits 4WD models only. Will not fit 2WD models.

Beaudesert Exhaust’s full 2 1/2″ mandrel bent exhaust system to suit the Toyota HiLux 2.7L Petrol.

Rugged

Rugged is our standard stainless steel system which is left as a raw finish.

Ultimate

Ultimate is our premium system which is made out of 304 grade stainless steel tube that we polish in-house.

Chassis Options:

Short Wheel Base – Dual cab utes with tub bodies. (2850mm from front hub to rear hub)

Long Wheel Base – Single cab or space cab tray back utes. (3110mm from front hub to rear hub).

Please measure if you are unsure.

Let your Naturally Aspirated car breathe! The factory manifold restricts the performance of your car. Once you change to extractors off the side of the head, you will gain up to 10% improved performance just by letting the gasses flow out of the motor *. This allows the motor to work easier and you will see an improvement in performance and fuel economy.

We make our own extractors. We mandrel bend and manufacture our extractors using 2mm wall thickness tube. This reduces the likelihood of cracking and any other weaknesses in the pipe work. Unlike other suppliers who use pressed merge collectors we have found laser cut merge collectors to give the best strength and flow possible.

We have found through research and development that a 2 1/2” exhaust system performs better than any other size for this vehicle. Not only have we completed real world testing, we also receive significant amounts of customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle. Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle.

Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:

• Beaudesert Exhaust’s own Extractors – 2mm wall thickness, laser cut merge collectors
• Ceramic coating of extractors is standard
• Double braided stainless steel flex joint standard on all systems – inner and outer braid makes the flex joint stronger
• Perforated straight through muffler as standard
• 2 bolt 10mm 304 grade stainless steel flange plates
• Reinforced brackets with supports – 10mm 304 grade stainless steel rod with knobs ensures the hangers don’t fall out of rubbers
• Systems are available in Rugged Range or Ultimate Range (304 grade polished stainless steel)
• Zinc plated locking nuts and bolts
• Fitting Kit and easy to follow instructions
• Boxed and bubble wrapped for freight
• Freighted Australia wide with insurance in a prompt timeframe

Please note: Our team will endeavour to dispatch your order as quickly as possible, however, some options when selected may require a longer fabrication time.

*Can vary for different vehicles.

Would you like your system fitted?

Our experts over at Innovative Motorworks are the best to assist with all fitting needs. They are located at 6/14 Hopper Avenue, Ormeau, QLD, 4208.

Fitment for this system requires 5 hours.

Fitting cost will be charged on the day of your appointment.

Select fitting option at checkout and one of our staff members will be in contact with you to confirm availability.

*Please be aware additional charges may apply on the day of fitment if standard system needs modifications. Ensure all your aftermarket modifications (located on the checkout page) are listed correctly to try and avoid unexpected charges.