$750 – $1,315
or 4 fortnightly payments from $188 with More info
Please ensure all exhaust system options have been selected to your preference – See ‘Options for exhaust’ below for more information
Beaudesert Exhaust’s full 2 3/4″ mandrel bent exhaust system to suit the Ford Ranger with DPF.
Rugged is our standard system which is made out of 441 grade stainless steel tube and is then painted in a heat proof paint.
Read more about 441 grade stainless steel and its benefits on our FAQ page.
Ultimate is our premium system which is made out of 304 grade stainless steel tube that we polish in-house.
This exhaust starts after the Diesel particulate filter (DPF) to comply with ADR laws. This exhaust system will only fit the 3.2L and not the 2.0L Bi-Turbo or Ranger Raptor.
A Diesel Particulate Filter (DPF) reduces the emissions from diesel fuelled vehicles. The filter traps diesel soot and once it is full it must be cleaned. This occurs through a process called “regeneration”, where the diesel particles are burnt off at high temperatures.
The DPF is not the only restriction in your exhaust. The factory pipe size and muffler both contribute to some loss in power and torque. On the factory exhaust system the airflow is restricted by the chambered internals of the muffler, as well the reduced size tube on each end. For vehicles fitted with a DPF our exhaust kits come standard with a small resonator this gives your vehicle the best airflow.
We have found through research and development that a 2 ¾” exhaust system performs better than any other size for this vehicle. Not only have we completed real world testing, we also receive significant amounts of customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle. Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle.
Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:
Options for exhaust
The no muffler pipe is a replacement pipe that bolts in place of the resonator to gain maximum note.
If you wish to have both muffler section and no muffler pipe, select the resonator above and click here to add the no muffler pipe to your cart.
You can also change the look of your exhaust with our tailpipe options: (standard tailpipe included)
Please note: Our team will endeavour to dispatch your order as quickly as possible, however, some options when selected may require a longer fabrication time.
Our workshop is located at 158 Enterprise Dr, Beaudesert QLD 4285.
Fitting cost for this system is $250*
Fitting will be charged on the day of your appointment.
Select fitting option at checkout and one of our staff members will be in contact with you to confirm availability.
*Please be aware additional charges may apply on the day of fitment if standard system needs modifications. Ensure all your aftermarket modifications (located on the checkout page) are listed correctly to try and avoid unexpected charges.
or 4 payments from $41 with AfterpaySelect options
or 4 payments of $119 with AfterpayAdd to cart
or 4 payments of $444 with AfterpayAdd to cart
or 4 payments of $5 with AfterpayAdd to cart