fbpx

Suitable for TOYOTA FJ CRUISER 2010-2016 4L V6 Petrol Exhaust

$2,149$3,789

Please ensure all exhaust system options have been selected to your preference.

VEHICLE WILL REQUIRE TUNING AFTER INSTALLATION OF FULL EXHAUST SYSTEM. 

Beaudesert Exhaust’s full mandrel bent exhaust system to suit the Toyota FJ Cruiser.

 

Rugged

Rugged is our standard system which is made out of stainless steel tube.

Read more about stainless steel and its benefits on our FAQ page.

 

This exhaust suits larger shock absorbers, larger tires, long range fuel tanks and Kaymar rear bars.

 

We have these different options available.

Cat back exhaust  The Beaudesert Exhaust Catalytic Converter back system starts from the rear of the factory manifolds and primary catalytic converters. This is a bolt on system with no engine lights with ECU.

Full exhaust – Beaudesert Exhausts own 2mm wall thickness, 3 into 1 extractors and high flow cats, into a 2 1/2″ exhaust system. There is no engine lights while running these cats so no tuning is required.

Full exhaust for Supercharged motors – This is a larger exhaust system for supercharged models. Beaudesert Exhausts own 2mm wall thickness, 3 into 1 extractors and high flow cats, into a 2 3/4″ exhaust system. There is no engine lights while running these cats so no tuning is required.

 

 

Let your Naturally Aspirated car breathe! The factory manifold restricts the performance of your car. Once you change to extractors off the side of the head, you will gain up to 10% improved performance just by letting the gasses flow out of the motor *. This allows the motor to work easier and you will see an improvement in performance and fuel economy.

 

We make our own extractors. We mandrel bend and manufacture our extractors using 2mm wall thickness tube. This reduces the likelihood of cracking and any other weaknesses in the pipe work. Unlike other suppliers who use pressed merge collectors we have found laser cut merge collectors to give the best strength and flow possible.

 

We have found through research and development that a 2 1/2” exhaust system performs better than any other size for this vehicle. We have seen that the non supercharged models respond better to a 2 1/2″ exhaust. When supercharged, you need to get the gas out slightly faster which is why we run 2 3/4″ exhaust for these cars. Not only have we completed real world testing, we also receive significant amounts of customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle. Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle.

Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:

Full System includes –

  • Beaudesert Exhaust’s own Extractors – 2mm wall thickness, 3 into 1 merge collectors
  • Ceramic coating of extractors is standard
  • Hi-flow Catalytic Converters – meets all emissions standards without restricting gas flow and no engine lights on the dash
  • VEHICLE WILL REQUIRE TUNING AFTER INSTALLATION

Cat Back system starts from the back of the factory manifold catalytic converters

  • Double braided stainless steel flex joint standard on all systems – inner and outer braid makes the flex joint stronger
  • Perforated straight through mufflers as standard
  • Tailpipe with polished stainless steel tips (standard)
  • 2 bolt 10mm 304 grade stainless steel flange plates
  • Reinforced brackets with supports – 12mm 304 grade stainless steel rod with knobs ensures the hangers don’t fall out of rubbers
  • Systems are available our Rugged Range.
  • Zinc plated locking nuts and bolts
  • Fitting Kit and easy to follow instructions
  • Boxed and bubble wrapped for freight
  • Freighted Australia wide with insurance in a prompt time frame

 

Would you like your system fitted?

Our experts over at Innovative Motorworks are the best to assist with all fitting needs. They are located at 6/14 Hopper Avenue, Ormeau, QLD, 4208.

Full Extractor System –

Fitment for this system requires all day.

Cat Back System – 

Fitment for this system require 2 hours.

Fitting cost will be charged on the day of your appointment.

 

Select fitting option at checkout and one of our staff members will be in contact with you to confirm availability.

*Please be aware additional charges may apply on the day of fitment if standard system needs modifications. Ensure all your aftermarket modifications (located on the checkout page) are listed correctly to try and avoid unexpected charges.

You may also like…