Ford F250 1999-2003 7.3L Turbo Diesel Powerstroke Exhaust

Beaudesert Exhaust’s full 4″ mandrel bent exhaust system to suit the Ford F250.

Rugged
Rugged is our standard stainless steel system which is left as a raw finish.

Ultimate
Ultimate is our premium system which is made out of 304 grade stainless steel tube that we polish in-house.

Does your car have bad turbo lag or lack that pulling power? The factory exhaust restricts the airflow that is coming from the turbo. The pipes are too small and the components are not letting the engine breathe to the best of its ability. Majority of this can be solved with a new exhaust from the back of the turbo.
You will gain anywhere up to 8-12% better performance just by letting the airflow out of the motor. Turbo lag will be dramatically reduced giving you better low down torque, whilst giving you more pulling power out of the top of the rev range.

We have found with our research and development the 4″ exhaust performs better than any other size on this car. Our customers have sent us feedback, on how the exhaust performs as well as the economy. They have tested our exhaust whilst towing a caravan or trailer and not towing at all.
Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:

• Replacement Dump Pipe off turbo – 2mm wall thickness
• 1/4in BSP Pyrometer fitting welded onto dump pipe – Standard in all systems
• 3″ dump pipe on manual models this allows it to fit between the firewall and motor with enough clearance
• 3 1/2″ dump pipe on automatic models
• Ceramic coating of dump pipe standard (Please note: There may be a delay with your order for the coating)
• Straight through vortex muffler as standard -pulls gas out of motor faster
• 3 bolt 10mm 304 grade stainless steel flange plates
• Reinforced brackets with supports – 14mm 304 grade stainless steel rod with knobs ensures the hangers don’t fall out of rubbers
• Systems are available in Rugged Range or Ultimate Range (304 grade polished stainless steel)
• Zinc plated locking nuts and bolts
• Fitting Kit and easy to follow instructions
• Boxed and bubble wrapped for freight
• Freighted Australia wide with insurance in a prompt time frame

Would you like your system fitted?

Our experts over at Innovative Motorworks are the best to assist with all fitting needs. They are located at 6/14 Hopper Avenue, Ormeau, QLD, 4208.

Fitment for this system requires 5 hours.

Fitting cost will be charged on the day of your appointment.

Select fitting option at checkout and one of our staff members will be in contact with you to confirm availability.

*Please be aware additional charges may apply on the day of fitment if standard system needs modifications. Ensure all your aftermarket modifications (located on the checkout page) are listed correctly to try and avoid unexpected charges.