fbpx

HOLDEN COLORADO 2016-2020 RGII 2.8L Turbo Diesel Exhaust With DPF

$789$1,389

Please ensure all exhaust system options have been selected to your preference – See ‘Options for exhaust’ below for more information

Beaudesert Exhaust’s full 2 3/4″ mandrel bent exhaust system to suit the Holden Colorado RGII with DPF.

 

Rugged

Rugged is our standard stainless steel system which is left as a raw finish.

 

Ultimate

Ultimate is our premium system which is made out of 304 grade stainless steel tube that we polish in-house.

 

This exhaust starts after the Diesel particulate filter (DPF) to comply with ADR laws.

 

A Diesel Particulate Filter (DPF) reduces the emissions from diesel fuelled vehicles. The filter traps diesel soot and once it is full it must be cleaned. This occurs through a process called “regeneration”, where the diesel particles are burnt off at high temperatures.

 

The DPF is not the only restriction in your exhaust. The factory pipe size and muffler both contribute to some loss in power and torque. On the factory exhaust system the airflow is restricted by the chambered internals of the muffler, as well the reduced size tube on each end. For vehicles fitted with a DPF our exhaust kits come standard with a small resonator this gives your vehicle the best airflow.

 

We have found through research and development that a 2 ¾” exhaust system performs better than any other size for this vehicle. Not only have we completed real world testing, we also receive significant amounts of customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle. Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle.

Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:

  • Exhaust starts after Diesel Particulate Filter to comply with ADR laws
  • Double braided stainless steel flex joint standard on all systems – inner and outer braid makes the flex joint stronger
  • Perforated straight through resonator as standard
  • No muffler pipe is available as an additional pipe for a louder note
  • This system can be purchased with no mufflers – designed for off road use only  Beaudesert Exhaust recommends purchasing a muffler or resonator then add the no muffler pipe. This is for legal reasons varying from state to state
  • 2 bolt 10mm 304 grade stainless steel flange plates
  • Reinforced brackets with supports – 12mm 304 grade stainless steel rod with knobs ensures the hangers don’t fall out of rubbers
  • Systems are available in Rugged Range or Ultimate Range (304 grade polished stainless steel)
  • Zinc plated locking nuts and bolts
  • Fitting Kit and easy to follow instructions
  • Boxed and bubble wrapped for freight
  • Freighted Australia wide with insurance in a prompt time frame

Options for exhaust

The no muffler pipe is a replacement pipe that bolts in place of the resonator to gain maximum note.

If you wish to have both muffler section and no muffler pipe, select the resonator above and click here to add the no muffler pipe to your cart.

 

Please note: Our team will endeavour to dispatch your order as quickly as possible, however, some options when selected may require a longer fabrication time.

 

Would you like your system fitted?

Our experts over at Innovative Motorworks are the best to assist with all fitting needs. They are located at 6/14 Hopper Avenue, Ormeau, QLD, 4208.

Fitment for this system requires 2 hours.

Fitting cost will be charged on the day of your appointment.

 

Select fitting option at checkout and one of our staff members will be in contact with you to confirm availability.

*Please be aware additional charges may apply on the day of fitment if standard system needs modifications. Ensure all your aftermarket modifications (located on the checkout page) are listed correctly to try and avoid unexpected charges.

You may also like…