Sale!

Suitable for TOYOTA LANDCRUISER 2016-Current 70 Series Wagon 4.5L V8 3 1/2″ Turbo Diesel Exhaust With DPF – ALUMINISED RUN OUT SALE!

$1,300 $800

or 4 fortnightly payments of $200 with Afterpay More info

This exhaust comes standard with a Resonator.

2 in stock

Beaudesert Exhaust’s full 3 1/2″ mandrel bent exhaust system to suit the Toyota LandCruiser 70 Series Wagon with DPF.

 

 

Exhaust will fit around larger shock absorbers, larger tires, long range fuel tanks and Kaymar rear bars.

The oxygen sensor is fitted back into our exhaust in the same place as factory exhaust.

 

This exhaust starts after the Diesel particulate filter (DPF) to comply with ADR laws.

 

A Diesel Particulate Filter (DPF) reduces the emissions from diesel fuelled vehicles. The filter traps diesel soot and once it is full it must be cleaned. This occurs through a process called “regeneration”, where the diesel particles are burnt off at high temperatures.

 

The DPF is not the only restriction in your exhaust. The factory pipe size and muffler both contribute to some loss in power and torque. On the factory exhaust system the airflow is restricted by the chambered internals of the muffler, as well the reduced size tube on each end. For vehicles fitted with a DPF our exhaust kits come standard with a small resonator this gives your vehicle the best airflow.

 

We have found through research and development that a 3 1/2” exhaust system performs better than any other size for this vehicle. Not only have we completed real world testing, we also receive significant amounts of customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle. Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle.

Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:

  • Exhaust starts after Diesel Particulate Filter to comply with ADR laws
  • Perforated straight through resonator as standard
  • No muffler pipe is available for a louder note
  • 3 bolt 8mm flange plates for aluminised systems
  • Reinforced brackets with supports – 5mm flat bar for quality and strength
  • Systems are available in aluminised steel
  • Zinc plated locking nuts and bolts
  • Fitting Kit and easy to follow instructions
  • Boxed and bubble wrapped for freight
  • Freighted Australia wide with insurance in a prompt time frame

Listen to the DPF Back 70 Series 3 1/2″ exhaust system with additional no muffler pipe here!

 

Would you like your system fitted by one of our experts?
Our workshop is located at 158 Enterprise Dr, Beaudesert QLD 4285.

 

Approximate fitting time is 2 Hrs

Fitting cost for this system is $200*
Fitting will be charged on the day of your appointment.

 

Select fitting option at checkout and one of our staff members will be in contact with you to confirm availability.

*Please be aware additional charges may apply on the day of fitment if standard system needs modifications. Ensure all your aftermarket modifications (located on the checkout page) are listed correctly to try and avoid unexpected charges.

You may also like…