TOYOTA LANDCRUISER 2016-Current 70 Series Single Cab 4.5L V8 3 1/2″ Turbo Diesel Exhaust With DPF

$1,300.00$2,100.00

Please ensure all exhaust system options have been selected to your preference – See ‘Options for exhaust’ below for more information

Clear

Beaudesert Exhaust’s full 3 1/2″ mandrel bent exhaust system to suit the Toyota LandCruiser 70 Series Single Cab with DPF.

 

Click here to go to the 3” exhaust option available for this vehicle.

Click here to go to the twin exhaust option available for this vehicle.

 

Exhaust will fit around larger shock absorbers, larger tires and long range fuel tanks. Toolboxes behind the wheels need 170mm minimum clearance from inside of toolbox to chassis rail.

The oxygen sensor is fitted back into our exhaust in the exact same place as factory exhaust.

 

This exhaust starts after the Diesel particulate filter (DPF) to comply with ADR laws.

 

A Diesel Particulate Filter (DPF) reduces the emissions from diesel fuelled vehicles. The filter traps diesel soot and once it is full it must be cleaned. This occurs through a process called “regeneration”, where the diesel particles are burnt off at high temperatures.

 

The DPF is not the only restriction in your exhaust. The factory pipe size and muffler both contribute to some loss in power and torque. On the factory exhaust system the airflow is restricted by the chambered internals of the muffler, as well the reduced size tube on each end. For vehicles fitted with a DPF our exhaust kits come standard with a small resonator this gives your vehicle the best airflow.

 

We have found through research and development that a 3 1/2” exhaust system performs better than any other size for this vehicle. Not only have we completed real world testing, we also receive significant amounts of customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle. Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle.

Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:

  • Exhaust starts after Diesel Particulate Filter to comply with ADR laws
  • Perforated straight through resonator as standard
  • No muffler pipe is available for a louder note
  • 3 bolt 8mm flange plates for aluminised systems
  • 3 bolt 10mm flange plates for stainless systems
  • Reinforced brackets with supports – 5mm flat bar for quality and strength
  • Systems are available in aluminised steel or a quality 304 grade polished stainless steel
  • Zinc plated locking nuts and bolts
  • Fitting Kit and easy to follow instructions
  • Boxed and bubble wrapped for freight
  • Freighted Australia wide with insurance in a prompt time frame

Listen to the DPF Back 70 Series 3 1/2″ exhaust system with additional no muffler pipe here!

 

Options for exhaust
The additional no muffler pipe is a replacement pipe that bolts in place of the muffler or resonator to gain maximum note, $200 for aluminised steel systems or $210 for stainless steel 304 grade systems*

You can also change the look of your exhaust with our tailpipe options: (standard tailpipe included)

  • Stainless steel tip tig welded on aluminised steel system $65 extra
  • Stainless steel tailpipe on aluminised steel system $165 extra

Please note: Our team will endeavour to dispatch your order as quickly as possible, however, some options when selected may require a longer fabrication time.

*The no muffler pipe is designed for off road use only.

 

Would you like your system fitted by one of our experts?
Our workshop is located at 158 Enterprise Dr, Beaudesert QLD 4285.

 

Approximate fitting time is 2 Hrs

Fitting cost for this system is $200*
Fitting will be charged on the day of your appointment.

 

Select fitting option at checkout and one of our staff members will be in contact with you to confirm availability.

*Please be aware additional charges may apply on the day of fitment if standard system needs modifications. Ensure all your aftermarket modifications (located on the checkout page) are listed correctly to try and avoid unexpected charges.

You may also like…