TOYOTA LANDCRUISER 1990-1997 80 Series 4.2L Turbo Diesel Exhaust

$960.00$2,020.00

Please ensure all exhaust system options have been selected to your preference – See ‘Options for exhaust’ below for more information

Clear

Turbo Type *

Please select your turbo – If you are unsure on what turbo you have please contact us with photos

Beaudesert Exhaust’s full 3″ mandrel bent exhaust system to suit the Toyota LandCruiser 80 Series.

 

Does your car have turbo lag or lack that pulling power? The factory exhaust restricts the airflow that is coming from the turbo. The pipes are too small and the components are not letting the engine breathe to the best of its ability. Majority of this can be solved with a new exhaust from the back of the turbo.
You will gain anywhere up to 8-12% improved performance just by letting the airflow out of the motor. Turbo lag will reduce resulting in better low down torque and giving you more pulling power out of the top of the rev range.

 

But be careful! Having an exhaust system too large for the motor can have the opposite effect! We have had some customers come back to us with aftermarket exhausts that are too big for the motor and in turn it has given them more turbo lag and less overall power gains.

 

We have found through research and development that a 3” exhaust system performs better than any other size for this vehicle. Not only have we completed real world testing, we also receive significant amounts of customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle. Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle.

Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:

  • Replacement Dump Pipe off turbo in 3 1/2” – 2mm wall thickness, sandblasted with heatproof paint
  • 1/4in BSP Pyrometer fitting welded onto dump pipe – Standard in all systems
  • Suits Factory, AXT, DTS, Denco/Schwitzer, Garrett GT28, Garrett T3 and Garrett T04E aftermarket turbos – please choose
  • Ceramic coating of dump pipe, standard for stainless steel systems, optional extra for aluminised steel systems
  • Double braided stainless steel flex joint standard on all systems – inner and outer braid makes the flex joint stronger
  • Perforated straight through muffler as standard – This allows the exhaust note to be close to factory sound.
  • No muffler pipe is available for a louder note
  • 2 replacement block rubbers supplied
  • 2 bolt 8mm flange plates for aluminised systems
  • 2 bolt 10mm flange plates for stainless systems
  • Reinforced brackets with supports – 5mm flat bar for quality and strength
  • Systems are available in aluminised steel or a quality 304 grade polished stainless steel
  • Zinc plated locking nuts and bolts
  • Fitting Kit and easy to follow instructions
  • Boxed and bubble wrapped for freight
  • Freighted Australia wide with insurance in a prompt time frame

Options for exhaust

Ceramic coating of dump pipe, standard for stainless steel systems (Aluminised steel $65 extra)

The additional no muffler pipe is a replacement pipe that bolts in place of the muffler or resonator to gain maximum note, $165 for aluminised steel systems or $220 for stainless steel 304 grade systems*

You can also change the look of your exhaust with our tailpipe options: (standard tailpipe included)

  • Stainless steel tip tig welded on aluminised steel system $65 extra
  • Stainless steel tailpipe on aluminised steel system $165 extra

Please note: Our team will endeavour to dispatch your order as quickly as possible, however, some options when selected may require a longer fabrication time.

*The no muffler pipe is designed for off road use only.

 

Would you like your system fitted by one of our experts?
Our workshop is located at 158 Enterprise Dr, Beaudesert QLD 4285.

 

Approximate fitting time is 2 1/2 – 3 1/2 Hrs

Fitting cost for this system is $250*
Fitting will be charged on the day of your appointment.

 

Select fitting option at checkout and one of our staff members will be in contact with you to confirm availability.

*Please be aware additional charges may apply on the day of fitment if standard system needs modifications. Ensure all your aftermarket modifications (located on the checkout page) are listed correctly to try and avoid unexpected charges.

You may also like…