NISSAN PATROL GQ 1987-1997 4.2L TD42 Ute Front and Rear Leaf Suspension Turbo Diesel Exhaust

$960.00$2,020.00

This system is to suit Leaf Spring Suspension only.

 

Please ensure all exhaust system options have been selected to your preference – See ‘Options for exhaust’ below for more information

Clear

Turbo Type *

Please select your turbo – If you are unsure on what turbo you have please contact us with photos

Beaudesert Exhaust’s full 3″ mandrel bent exhaust system to suit the Nissan Patrol GQ with aftermarket turbo.

 

PLEASE NOTE: Due to some variations, the fitment of this exhaust system requires welding of a flange plate on engine pipe to dump pipe.

 

We have found through research and development that a 3” exhaust system performs better than any other size for this vehicle. Not only have we completed real world testing, we also receive significant amounts of customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle. Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle.

Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:

  • Replacement Dump Pipe off turbo in 3” or 3 1/2″ – 2mm wall thickness, sandblasted with heatproof paint
  • 1/4in BSP Pyrometer fitting welded onto dump pipe – Standard in all systems
  • Suits Factory (HT18), DTS, Denco/Schwitzer, Garrett GT28 and Garrett T03 aftermarket turbos on different manifolds – please specify
  • Double braided stainless steel flex joint standard on all systems – inner and outer braid makes the flex joint stronger
  • Perforated straight through muffler as standard
  • No muffler pipe is available for a louder note
  • 2 bolt 8mm flange plates for aluminised systems
  • 2 bolt 10mm flange plates for stainless systems
  • Reinforced brackets with supports – 5mm flat bar for quality and strength
  • Systems are available in aluminised steel or a quality 304 grade polished stainless steel
  • Zinc plated locking nuts and bolts
  • Fitting Kit and easy to follow instructions
  • Boxed and bubble wrapped for freight
  • Freighted Australia wide with insurance in a prompt time frame

Options for exhaust

The additional no muffler pipe is a replacement pipe that bolts in place of the muffler or resonator to gain maximum note, $165 for aluminised steel systems or $220 for stainless steel 304 grade systems.*

You can also change the look of your exhaust with our tailpipe options: (standard tailpipe included)

  • Stainless steel tip tig welded on aluminised steel system $65 extra
  • Stainless steel tailpipe on aluminised steel system $165 extra

Please note: Our team will endeavour to dispatch your order as quickly as possible, however, some options when selected may require a longer fabrication time.

*The no muffler pipe is designed for off road use only.

 

Would you like your system fitted by one of our experts?
Our workshop is located at 158 Enterprise Dr, Beaudesert QLD 4285.

 

Approximate fitting time is 4 – 5 Hrs

Fitting cost for this system is $300*
Fitting will be charged on the day of your appointment.

 

Select fitting option at checkout and one of our staff members will be in contact with you to confirm availability.

*Please be aware additional charges may apply on the day of fitment if standard system needs modifications. Ensure all your aftermarket modifications (located on the checkout page) are listed correctly to try and avoid unexpected charges.

You may also like…