Ford F250 1999-2003 7.3L Turbo Diesel Powerstroke – ALUMINISED RUN OUT SALE!


or 4 fortnightly payments of $450 with Afterpay More info

Please ensure all exhaust system options have been selected to your preference


Beaudesert Exhaust’s full 4″ mandrel bent exhaust system to suit the Ford F250.


Aluminised run out systems – unfortunately once these systems are out of stock they are gone.


Does your car have bad turbo lag or lack that pulling power? The factory exhaust restricts the airflow that is coming from the turbo. The pipes are too small and the components are not letting the engine breathe to the best of its ability. Majority of this can be solved with a new exhaust from the back of the turbo.
You will gain anywhere up to 8-12% better performance just by letting the airflow out of the motor. Turbo lag will be dramatically reduced giving you better low down torque, whilst giving you more pulling power out of the top of the rev range.


We have found with our research and development the 4″ exhaust performs better than any other size on this car. Our customers have sent us feedback, on how the exhaust performs as well as the economy. They have tested our exhaust whilst towing a caravan or trailer and not towing at all.
Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:

  • Replacement Dump Pipe off turbo – 2mm wall thickness, sandblasted with heatproof paint
  • 1/4in BSP Pyrometer fitting welded onto dump pipe – Standard in all systems
  • 3″ dump pipe on manual models – this allows it to fit between the firewall and motor with enough clearance
  • 3 1/2″ dump pipe on automatic models
  • Straight through spiral vortex muffler as standard – pulls gas out of motor faster
  • 3 bolt 8mm flange plates for aluminised systems
  • Reinforced brackets with supports – 14mm rod
  • Systems are available in aluminised steel
  • Stainless Steel tailpipe tip standard on aluminised steel systems
  • Zinc plated locking nuts and bolts
  • Fitting Kit and easy to follow instructions
  • Boxed and bubble wrapped for freight
  • Freighted Australia wide with insurance in a prompt time frame

Listen to the Ford F250 7.3L exhaust system here!


Would you like your system fitted by one of our experts?
Our workshop is located at 158 Enterprise Dr, Beaudesert QLD 4285.


Approximate fitting time is 5 – 6 Hrs

Fitting cost for this system is $400*
Fitting will be charged on the day of your appointment.


Select fitting option at checkout and one of our staff members will be in contact with you to confirm availability.

*Please be aware additional charges may apply on the day of fitment if standard system needs modifications. Ensure all your aftermarket modifications (located on the checkout page) are listed correctly to try and avoid unexpected charges.